Black Box LR1530A-EU-R3, LR1530A-R3 manual Typical Applications & HOW to Configure Them

2 - TYPICAL APPLICATIONS & HOW TO CONFIGURE THEM

The router is an Ethernet Bridge/Router that supports frame relay RAW 1490 permanent virtual circuits, frame relay encapsulated PPP permanent virtual circuits and PPP leased lines. This section will describe how to set up the router using each of its networking functions.

The router may be configured as a simple Ethernet bridge, an Ethernet IP router, an Ethernet IPX router, or a combination of the three. When operating the router as a combination bridge/router simply configures each of the components separately.

The configuration options described within this section are only for initial set up and configuration purposes. For more information on all of the configuration parameters available, please refer to the router PPP Menus Reference Manual file on the accompanying CD-ROM.

Important: The router uses FLASH memory to store the configuration information. Configuration settings are stored to FLASH memory after there has been 30 seconds of idle time. Idle time is when there is no selection or modification of the values in the built-in menu system. If you wish to save the configuration immediately, enter “=” to jump to the main menu, then select option “6” to save the configuration.

17