Applications
Configure Network Address
Translation (NAT)
Support is provided for Network Address Translation (NAT). Network Address Translation is a technique which translates private IP addresses on a private network to valid global IP addresses for access to the Internet. Port translation (NAPT) allows more than one private IP address to be translated to the same global IP address. Port translation allows data exchanges initiated from hosts with private IP addresses to be sent to the Internet via the router using a single global IP address. A global IP address must be assigned to the WAN link upon which NAPT is enabled for NAPT to work. The global IP address will be assigned by the ISP.
To use NAPT, the private network addresses of the services that will be available globally must be assigned:
7NAT Exports
Location: Main
ÄConfiguration
ÄApplications Set up
ÄNAT Exports
ÄEdit Services
Äenter the private network IP address of each service offered.
The NAT enabled option allows you to enable Network Address Translation.
7NAT Enabled Location: Main
ÄConfiguration
ÄWAN Set up
ÄRemote Site Set up
ÄEdit Remote Site
ÄProtocol Set up
ÄIP Parameters
ÄNAT Enabled
ÄEnabled
48
