Black Box LR1530A-R3, LR1530A-EU-R3 Define an IP Static Route, Edit Static Route Location Main

Applications

Define an IP Static Route

Static IP routes may be defined when one specific router is to be used to reach a destination IP network. The static route will have precedence over all learned RIP routes even if the cost of the RIP learned routes is lower.

7Edit Static Route Location: Main

ÄConfiguration

ÄIP Routing Set up

ÄIP Routes

ÄEdit Route

ÄEdit Static Route

ÄRemote Site

ÄNext Hop

ÄCost

ÄAdd

Each static IP route is defined in the Edit Route menu. The destination network IP address is specified when you first enter the menu and then the IP address of the next hop route and the cost may be defined.

Once all of the static IP routes are defined they may be viewed with the Show Static Routes command from the IP Routes menu.

Configuration: When the IP routing protocol is set to none, the subnet mask size must also be defined when creating a static route entry. The subnet mask is required to allow a static route to be created to a different IP network address.

The configuration options described here are only for initial set up and configuration purposes. For more information on all of the configuration parameters available please refer to the router PPP Menus Reference Manual file on the accompanying CD-ROM.

36