Black Box LR1530A-EU-R3, LR1530A-R3 Frame Relay enable Location Main, Link Speed Location Main

Applications

Configuration: The default configuration for routers shipped outside North American is to have frame relay disabled. To run frame relay on

these routers, it must first be enabled

7Frame Relay enable Location: Main

ÄConfiguration

ÄWAN Set up

ÄLink Set up

ÄFrame Relay enabled

The router will request confirmation of the change, enter “yes”.

For an router with a CSU-DSU interface, the default clock speed that the router will expect to receive from the DCE link is 64Kbps. If the DCE link is 56 Kbps, then the Link Speed value must be reset to 56 here.

7Link Speed Location: Main

ÄConfiguration

ÄWAN Set up

ÄLink Set up

ÄLink Speed 56

21