Blaupunkt 3.3 EE Additional navigation functions, Adding/Deleting a Way Point, Itinerary

Additional navigation functions

Additional navigation functions

The features described in this chapter are only available once a route has been planned (with or without use of the GPS signals). (Chap. “Route planning” and chap. “Route planning without the use of GPS signals”)

Adding/Deleting a Way Point

You use the Edit Way Points menu to add/ delete Way Points. You can also use this menu to change your route directly on the map. You can use Way Points to:

•Expand your route by an additional destination (destination is added at the end of the route)

•Enter an intermediate destination

Please read the section “Entering a route” in the “Navigation” chapter and the chapter “Using the map”.

Driving a route (Simulation)

You can use the Lucca to run a simulation of your journey to get an overview of the route.

➜Press the Route button in the Navigation menu.

The Route menu opens.

➜Press the Simulation button. The Lucca will now display the map start the simulation.

➜ Press the Back button or on a random point on the map to stop/finish the simulation.

Itinerary

You can also use the Lucca to view a description of your route and you can use it to:

•View particular sections of the route on the map

•Block particular sections of the route

NB:

When blocking sections of a route during route guidance, the route will be re-planned there and then under consideration of the blockages and route guidance is subsequently commenced.

➜Press the Route button in the Navigation menu.

The Route menu opens.

➜Press the Itinerary button. The Itinerary menu opens.

➜Press on a road shown in the description to highlight it.

➜Press Avoid … to block this particular section of the route.

The Avoid menu opens.

➜Press Manoeuvre to skip the selected manoeuvre, e.g. to circumvent a particular junction.

-or -

➜Press on Road to circumvent the selected road.

-or -

➜Press on a more distant point to block this particular section of the route (starting from the selected road).

➜Press on Show to view this particular section of the route on the map.

The Lucca will now plan the route anew and display the map.

NB:

If you want to remove the block placed on a section of the route, you first have to end route guidance and then select the destination again under Edit Way Points in the History menu to continue route guidance.

29