Blaupunkt 3.3 EE installation instructions Uploading cartographic material, Lucca software

Uploading cartographic material Lucca software

Uploading cartographic material

The cartographic material of the country in which you bought your Lucca will have been pre-installed onto your Lucca. This cartographic material will also be provided on the supplied CD/DVD for later re-installation. Depending on the version you bought, the supplied CD/DVD might also contain other cartographic material.

You now have the following options:

•You can upload cartographic material from the CD/DVD to the Lucca’smemory

•You can use cartographic material stored on the SD-/MMC card

You will also be able to buy SD-/MMC card map updates.

Using the cartographic material stored on a SD-/MMC card

➜Turn on the Lucca using the On/Off button.

The SD-/MMC card slot is located on the Lucca right side.

➜Push the SD-/MMC card into the slot as indicated by the marking shown on the slot until it engages.

You can now immediately use the new data for navigation. Lucca always uses the cartographic material stored on the SD-/MMC card and that stored in its memory to navigate.

Using cartographic material with the Lucca

Downloading the cartographic material contained on the supplied CD/DVD into the Lucca’s memory using a PC:

➜Connect the Lucca to the PC through the USB port.

➜Turn on the Lucca using the On/Off button.

You will now be shown a dialog box.

➜Follow the onscreen instructions. Download the cartographic material into the memory. The old cartographic material will not be overwritten.

Lucca software

Reinstalling the navigation software

The Lucca’s navigation software, including instructions, is provided on the supplied CD/DVD for reinstallation purposes.

Updating the navigation software

Blaupunkt regularly releases software updates in order to make sure that your Lucca is always up to date. These updates can be downloaded from www.blaupunkt. com.

Please follow the Lucca’s onscreen instructions for downloading.

41