Blaupunkt 3.3 EE Displaying POIs, POI Presentation menu can be used to show/hide POIs

Basic settings

You can also use this menu to select the cursor on the map to be aligned with the relevant road you are travelling along or to show your actual position, e.g. when walking.

NB:

If you selected “Pedestrian” under Vehicle Profile in the route parameters, the cursor will automatically show your actual position. (Chap. “Selecting route parameters”)

➜Press the Route Settings button in the Advanced Settings menu.

The Route Settings menu opens.

The Lucca is configured by default to navigate across borders. If, however, you, for example, live close to a border and/ or for some other reason want to prevent the Lucca from including roads located in another country when navigating and planning routes, you can deactivate this function:

➜Press the Cross-border Planning button to activate (tick) or deactivate (no tick) this function.

The Lucca will always show the cursor on the road currently travelled while navigating. If, however, you are travelling as a pedestrian and want to see your precise position on the map, you can deactivate this function:

➜Press the Keep position on road button to activate (tick) or deactivate (no tick) this function.

Data management

You can use the User Data Management menu to save, delete and restore your user data and settings.

You can also use this menu to restore the Advanced Settings to their default settings.

NB:

If you restore the Lucca to its default settings:

•all destinations and personal settings will be deleted.

•the Navigation application will be closed and restarted.

➜Press the User Data Management button in the Advanced Settings menu.

The User Data Management menu opens.

You will now be presented with the following options:

–Backup Data: For backing-up and saving data (History, Favourites, Routes, Pins)

–Restore Data: To restore user data

–Remove Pins: To delete all of the pins on the map

–Restore Factory Settings: To reset all of the settings to their default settings

–Reset Advanced Settings: To reset all of the Advanced Settings to their default settings

➜Simply press the relevant button to change any of the above settings.

You will now be shown a confirmation prompt.

➜Press No if you do not want to accept the setting.

- or -

➜Press Yes to accept the setting.

Displaying POIs

The POI Presentation menu can be used to show/hide POIs.

Please read the chapter “Navigation”, “Selecting a POI”, “Show/Hide POIs” for more information.

37