Maintenance
Cleaning
Every 12 Months:
A factory authorized service person should:
1.Open and clean the inside of the control panel.
2.Check and tighten all electrical connections.
3.Check DC gear motor brushes for wear.
4.Check the drive belt for cleanliness.
5.MT1828G
If maintenance is required contact your local ser- vice company, a factory representative or the Blodgett Oven company.
WARNING!!
Always disconnect the power supply be- fore cleaning or servicing the oven.
WARNING!!
If the oven needs to be moved, the gas must be turned off and disconnected from the unit before removing the restraint. Re- connect the restraint after the oven has been returned to its original location.
23
