Bosch Appliances LBB 3588 user manual Selecting camera number, Editing camera ID

USING DCN AUTOMATIC CAMERA CONTROL

Where ‘n’ is the number of seats (or units).

Only seat (or unit numbers) without camera assignment can be selected.

NOTE: During installation, the audience monitor continues to show the image from the overview camera, except in one-camera configurations where it will show the same view as the operator monitor. The operator monitor shows the selected camera picture.

3

Selecting camera number

To continue with the camera installation, a camera number should be assigned to each seat or unit number. To do so:

• Select the number of the camera you want to assign.

Editing camera ID

Each camera can have a descriptive ID (maximum 16 characters) entered in the ‘Camera ID:’ edit field. This, for example, could be used to give each camera a descriptive ID relating to the position of the camera in the confer- ence venue. This text appears on the operator monitor but not on audience monitors.

Fig.7 Camera ID editing

To enter or edit the camera ID:

•Select the ‘Camera ID’ edit field.

•Enter the required text.

DCN Automatic Camera Control	Digital Congress Network
Software User Manual	Page 3-8