Bosch Appliances XD Section Delete decoder logo, page, Auto-connect, Audio Audio Version Only

36 en Configuration Using a Web BrowserVIP XD

NOTICE!

i	Please note that the SSL encryption must be activated and configured at both ends of a
	connection. This requires the appropriate certificates to be uploaded onto the VIP XD (see
	Section Delete decoder logo, page 50).

You can activate and configure encryption of the media data (video, audio and metadata) on the Encryption page (see Section 5.20 Encryption, page 48).

Auto-connect

Select the On option to automatically re-establish a connection to one of the previously specified IP addresses after each reboot, after a connection breakdown or after a network failure.

NOTICE!

i In the default setting, Stream 2 is transmitted for automatic connections. Bear this fact in mind when assigning the profile to the corresponding sender.

Audio (Audio Version Only)

Select the On option if you wish to additionally transmit a standalone G.711 encoded audio stream with alarm connections.

Default camera

Here you can select the camera whose image will be automatically displayed first on the receiver when the alarm connection is made. Depending on the system configuration, you can then select the other cameras as well.

i	NOTICE!
	The numbering follows the labeling of the video inputs on the corresponding sender.

DOC V4.0 2009.06 Installation and Operating Manual Bosch Security Systems