Installation And Removal Of The Blade

! WARNING

Assembly

Disconnect plug from power source before performing any assembly,

adjustment or repair to avoid possible injury.

1.Loosen rear cover plate screw one full turn. Do not completely remove screw.

2.Loosen front cover plate screw (approximately three full turns) until it clears the tab on the cover plate; but do not completely remove screw. Rotate coverplate counter-clockwise, exposing arbor bolt blade area.

3.Rotate the guard by hand to clear the blade. Let go of guard. Plastic will be held out of way by front screw.

4.Press and hold the arbor lock. The blade may need to be rotated for the arbor lock to catch. Use the blade wrench to remove the blade bolt by turning wrench clockwise. NOTE: The blade bolt has a left hand thread.

Lower Guard

Front Cover

Plate Screw

Turn Bolt This

Way to Loosen

Outer

Washer

Blade Bolt

Chip (Hex Cap)

Deflector

Figure 1. Blade Removal

5.Remove the blade bolt, arbor washer, outer washer and the blade. Inner washer does not need to be removed (Figure 2).

Outer Washer

Inner Washer

Arbor Washer

Blade Bolt

(Left Hand Thread)

Sawblade

Figure 2. Blade Hardware

6.To install the 10" blade, fit blade between the chip deflectors and onto arbor shaft (Figure 3). NOTE: Make sure the rotation arrow on the blade matches the clockwise rotation arrow on the lower guard.

	Inner
	Washer
	Arbor Shaft
	Chip
	Deflector
Figure 3. Blade Installation
! WARNING	To avoid injury, do not use a blade
	larger or smaller than 10" diameter

and 5/8" arbor.

7.Replace the outer washer, arbor washer, and tighten blade bolt finger tight counter-clockwise (see Figure 2). Press the arbor lock and tighten blade bolt securely using blade wrench, but do not overtighten.

8.Rotate cover plate clockwise to original position and tighten cover plate screws.

!WARNING Tighten the cover plate screws. Loose cover plate screw may

interfere with and hang-up lower blade guard. Never use saw without cover plate securely in place. Lower guard will not function properly.

9.Be sure the arbor lock is released so the blade turns freely.

After installing a new blade, make sure the blade does not interfere with the table insert at the 0° and 45° bevel posi-

tions. Lower the blade into the table slot and check for any contact with the base or turn table structure. If blade contacts base or table, seek authorized service at 1-877-BOSCH99.

10. Replace blade wrench in storage area on saw.

12.

4405 specifications

The Bosch Power Tools 4405 is a robust and versatile tool that caters to the needs of both professionals and DIY enthusiasts. With its compelling features and advanced technologies, the 4405 has established its position as a reliable choice for various cutting and drilling applications.

One of the standout features of the Bosch 4405 is its powerful motor. The tool is equipped with a 5.0 amp motor that delivers a no-load speed of up to 3,200 RPM. This powerful motor ensures swift and efficient performance, making it ideal for both heavy-duty tasks and intricate projects. The variable speed feature allows users to adjust the speed according to the material they are working on, providing greater control and flexibility.

The Bosch 4405 is also designed with precision in mind. It comes with a sturdy base that offers enhanced stability during operation, reducing vibrations and improving accuracy. The tool features a laser guide that aids in aligning cuts with precision, making it easier for users to achieve clean and accurate results. Additionally, its adjustable bevel cutting capability allows for angles up to 45 degrees, making it suitable for beveled cuts in various materials.

Durability is another characteristic that sets the Bosch 4405 apart. Constructed from high-quality materials, this power tool is designed to withstand the rigors of heavy use. The tool also features a dust blower that keeps the cutting line clear of debris, ensuring unobstructed visibility and enhancing safety during operation.

Safety features are paramount in the design of the Bosch 4405. It comes equipped with a blade guard that provides an additional layer of protection, minimizing the risk of accidental contact with the blade. The ergonomic handle is designed for comfort, reducing operator fatigue during extended use.

In summary, the Bosch Power Tools 4405 stands out for its powerful performance, precision cutting capabilities, durability, and safety features. Whether you are tackling a complex project or simple home repairs, the 4405 is a reliable tool that delivers impressive results, making it a must-have for any toolbox.

Bosch Power Tools 4405 Installation And Removal Of The Blade, Larger or smaller than 10 diameter

Models: 4405

Assembly