
Using the Wave/PC™ Unit Controls
The Wave/PC™ unit control panel
The button panel functions are defined in Figure 40. You must use the control panel to change the clock and alarm settings, to select the Sleep feature time, or to select any component connected to the AUX input.
The control panel On/Off and Volume buttons have raised ridges to help you locate these frequently used buttons.
Figure 40
The Wave/PC unit control panel
Sets or checks the wakeup time
Selects or stores presets
Turns the volume down
Turns the unit on and selects AUX
Turns the unit on and selects AM or FM
Alarm |
| Clock |
Set | Alarm Mode | Set |
| Tuning |
|
1 | 2 | 3 |
| Presets |
|
4 | 5 | 6 |
Volume
AUX AM/FM On/Off
Sleep/Snooze
Wave/PC™
Selects AM/FM tuner, tone, both, or no alarm
Sets the clock time
Tunes up/down (AM/FM) or selects next/previous item (CD, File, Web)
Turns the volume up
Turns the Wave/PC
system on/off,
deactivates the alarm
Sets timed shutoff
Note: When the unit is on and in the clock display mode, pressing both Tuning buttons together displays the currently selected station.
The Wave/PC unit display
You can change the display mode of the Wave/PC unit to always show either the clock or the AM/FM tuner display. In the clock mode, the display shows the time while the radio is on. In AM/FM mode, the display shows the selected station frequency.
To change the display mode, turn the Wave/PC unit on. Press and hold the Clock Set button on the control panel and then press the AM/FM button to switch between clock and AM/FM tuner display modes.
PDF259774_00 | April 12, 2001 | 47 |