Creating a Wiremarker
Legend to be printed: 1001
Setup Status:
H Justify: Center
V Justify: Center
Rotation: 0 Degrees
Format: Component
1.Press <Shift> + <Form Clear> to delete all lines of text and reset the font to the default value of 9.
2.Press <Shift> + <0> to change Format mode from “Component” to “Wire” (note change from “C” to “W” on Status Bar on LCD).
3.Enter 1001on line 1.
4.Press <Print>.
Creating Serialized Wiremarkers
Legends to be printed: A201 A202 A203 A204 A205
Setup Status:
H Justify: Center
V Justify: Center
Rotation: 0 Degrees
Format: Wire
1.Press <Legend Clear> to clear the text from line 1.
2.Check the STATUS BAR to make sure the unit is in Wiremarker mode. If not, press <Shift> + <0> to toggle from Component mode to Wiremarker mode.
3.Enter A201on line 1.
4.Press < = > to position the cursor under the last character.
5.Press <Func> + <Serial>.
6.When “No. to Serial? “ prompt appears, enter 5 , then press <Enter>.
7.When “No. of Copies?” prompt appears, enter 2
8.Press <Enter> or <Print>. The printer will begin printing two each of the five wiremarkers listed above.
30
