Quick Label Making Instructions
The following steps are all you need to create a simple label. Read the rest of this manual for detailed information on each of these steps, as well as other functions not listed here.
Follow these steps:
1.Install a fully charged battery pack.
2.Install a ribbon cartridge.
3.Install a label roll of the desired type and size.
4.Turn the power switch “On.”
5.Type the text for your label. Press the <Enter> key to begin each new line of text.
6.Edit the text so it reads exactly as you want it to.
7.Press the <Print> key to print the label.
8.Use the
8
