ASSEMBLING YOUR BREVILLE JUICE FOUNTAIN cont’d
Continue to slide the food pusher down the |
Fig 5B. |
OPERATING YOUR BREVILLE JUICE FOUNTAIN
Step 1. | Step 4. |
feed chute. (Please see 5B.) |
Wash your selection of fruit and vegetables
ready for juicing.
Most fruit and vegetables such as apples, carrots and cucumbers will not need to be cut to size as these will fit into the feed chute whole. When juicing carrots place the tip of the carrot in last.
With the motor running place food down the Feed Chute. Using the Food Pusher, gently guide food down the Feed Chute. To extract the maximum amount of juice, always push the Food Pusher down slowly.
Fig 4.
TO EXTRACT
MAXIMUM JUICE
PUSH DOWN
SLOWLY
Step 6.
Place the Pulp Container into position by tilting the pulp container slightly.
Hint:
Fig 6.
Step 2.
Ensure the Juice Fountain is correctly assembled. (See pages 7, 8 and 9.) Ensure you place the juice jug under the spout while juicing.
To minimize washing up we suggest you place a plastic freezer bag (or plastic grocery bag) into the pulp container to collect the pulp. The bag may also prevent pulp from spitting out of the pulp container.
(Please see page 11.)
Step 7. | Fig 7. | |
Place the juice jug provided under the spout | ||
| ||
on the right hand side of the Juice Fountain. |
|
A glass could also be used to
collect the juice.
Step 3.
Plug the power cord into a power outlet and turn the power ‘ON’. Turn the ‘ON/OFF’ switch on the Juice Fountain down to the ‘ON’ position to start the Juicer operating.
Step 5.
Juice will flow into the juice jug and the separated pulp will accumulate in the Pulp Container.
The Pulp Container can be emptied during juicing by turning the Juice Fountain ‘OFF’ and then carefully removing the Pulp Container. (Replace empty Pulp Container before continuing to juice.)
10
NEVER USE FINGERS TO PUSH FOOD DOWN THE FEED CHUTE OR TO
CLEAR THE FEED CHUTE. ALWAYS USE THE FOOD PUSHER PROVIDED. | 11 |
