To install the P-touch Editor Ver. 3.1 software, click the top button (P-touch Editor) on the right side. Then, continue with the procedure in Installing P-touch Editor Ver. 3.1 on page 8.

3Click the left button (P-touch Quick Editor). The InstallShield® Wizard for installing the P-touch Quick Editor software starts up, and then the Welcome dialogue box appears.

4Carefully read the contents of the dialogue box, and then click the Next button to continue. The User Information dialogue box appears.

5Type the necessary information into the appropriate boxes (If the information has already been registered in Windows®, it will automatically appear.), and then click the Next button. A dialogue box appears, asking for confirmation of the entered information.

6Click the Yes button to register the entered information.￿To change the information, click the No button, and then return to step 4.The Choose Destination Location dialogue box appears.
7Click the Next button to begin installation.

8After P-touch Quick Editor is installed, a dialogue box appears, allowing you to select where the shortcut to P-touch Quick Editor will be added (page 17).

9Select the desired location for the shortcut, and then click the Next button. A dialogue box appears, allowing you to select whether or not to install the printer driver.

To install the printer driver, click the Yes button. The first Driver Setup dialogue box appears, informing you that the PT-2420PC printer driver will be installed.

Continue with the procedure in Installing the printer driver on page 9.

If the printer driver is already installed, click the No button. A dialogue box appears, showing that installation is finished.

Select “Yes, I want to restart may computer now.”, click the Finish button to restart the computer, and then remove the CD-ROM from the CD-ROM drive.

For Windows®

7