For Windows®

6If “Replace with new Brother PT-2420PC” or “Add Brother PT-2420PC” was selected:

With Windows® 98/98SE/Me/2000:

A dialogue box appears, instructing you to connect the PT-2420PC to the computer.

Connect the PT-2420PC to the computer using the enclosed USB interface cable as described on page 5, and then turn on the PT-2420PC. A dialogue box appears, showing that the printer driver has been installed.

Select “Yes, restart immediately.”, and then click the Finish button to restart the computer.

With Windows® XP:

In the first Found New Hardware Wizard dialog box that appears, select “Install the software automatically (Recommended)”, and then click the Next button.

If a dialog box warning appears indicating that the software has not passed Windows Logo testing, simply continue with the installation.

In the Found New Hardware Wizard dialog box that appears, indicating that installation of the PT-2420PC and the Found New Hardware Wizard are finished, click the Finish button.

In the dialog box that appears, indicating that installation is finished, select “Yes, restart immediately.”, and then click the Finish button. The computer is restarted.

Remove the CD-ROM from the computer.

12