Only the options with a check mark beside them are installed. Select the options that you wish to install, and then click the Install button to begin installation.

￿In order to print from the PT-2420PC,

“PT-2420PC Driver” must be selected for installation.

6When the installation is finished and the following dialogue box appears, click the Quit button.

7When the dialogue box appears asking if you wish to restart the computer, click the Restart button to restart the computer.

Installing P-touch Editor Ver. 3.1

The P-touch Editor Ver. 3.1 software includes a variety of more complex functions for printing barcodes and images, enabling you to design just about any label that you can imagine. Install the P-touch Editor Ver. 3.1 software on a PC as described below.

1With the PT-2420PC and computer turned off, connect the PT-2420PC to the Macintosh using the enclosed USB interface cable. Be sure to leave the PT-2420PC off.

2Turn on the Macintosh.

3Insert the enclosed CD-ROM into the computer’s CD-ROM drive. A folder opens, allowing you to view the contents of the CD- ROM.

4Double-click the P-touch Editor Ver3.1 folder to open it.

5Double-click the P-touch Editor 3.1 Installer icon in the folder. The installer starts up.

For Macintosh

6Select the installation method.

If “Install” is selected, the installation of all components begins.

About 120 MB of available hard-disk space is needed to begin installation.

If enough hard-disk space is available, click the Install button.

Clicking the Custom Install button displays a dialogue box that allows you to select which options to install.

Only the options with a check mark beside them are installed. Select the options that you wish to install, and then click the Install button to begin installation.

To install the minimum necessary components, select only the following components, and then start the installation.

•P-touch Editor Ver3.1

•PT-2420PC Driver

•Fonts

In this case, about 30 MB of free space on the hard disk is required.

￿In order to print from the PT-2420PC,

“PT-2420PC Driver” must be selected for installation.

15