Printing a label

1Turn on the PT-2420PC and start up the computer.

2Start up either P-touch Quick Editor or P-touch Editor Ver. 3.1, and make sure that the PT-2420PC is selected as the printer.

3Design your label.

4 Start printing the label. The status indicator of the PT-2420PC flashes while it is receiving the data. After the label is printed, press in on the tape cutter button to cut off the label.

￿ While printing multiple copies, the PT- 2420PC may stop printing for a short while in order for the print head to cool down. Printing will continue once the print head has sufficiently cooled down.

￿ To feed out extra tape, hold down the Power/Feed key for a few seconds.

Removing the label backing

The enclosed tape separator enables you to easily remove the backing from labels printed on laminated tape.

1Hold the tape in your left hand, with the printed surface facing up, and hold the stick in your right hand.

2Pass the tape halfway through the long narrow hole in the stick.

GH ABCDEF

3Turn the stick three-quarters of a turn towards you, and then pull the stick away from you as shown in the illustration.

4Peel off the label backing.

ABCDEF

22