Continue with the procedure in Installing the printer driver below.

If the printer driver is already installed, click the No button. A dialogue box appears, showing that installation is finished.

Select “Yes, I want to restart may computer now.”, click the Finish button to restart the computer, and then remove the CD-ROM from the CD-ROM drive.

Installing the printer driver

With Plug-and-Play, new devices connected to the system are detected, and their drivers are automatically installed. Since the PT-2420PC will be connected through the USB port, its driver will be installed with Plug-and-Play. Be sure to read the installation instructions described below before installing the printer driver supplied on the CD- ROM.

￿Do not connect the P-touch 2420PC to the computer until you are instructed to do so, otherwise the PT-2420PC printer driver may not be installed correctly.

With Windows® 98/98SE/Me/2000:

1Click the Next button. A dialogue box appears, instructing you to connect the PT- 2420PC to the computer.

2Connect the PT-2420PC to the computer using the enclosed USB interface cable as described on page 5, and then turn on the PT-2420PC. A dialogue box appears, showing that the printer driver has been installed.

3Click the Finish button. A dialogue box appears, showing that installation is finished.

4Select “Yes, I want to restart my computer now.”, click the Finish button to restart the computer, and then remove the CD-ROM from the computer.

With Windows® XP:

1In the dialog box that appears, informing you that the PT-2420PC printer driver will be installed, click the Next button.

2After the dialog box appears, instructing you to connect the P-touch 2420PC and turn it on, connect the P-touch 2420PC to the computer using the enclosed USB interface cable as described on page 5, and then turn on the P-touch 2420PC.

For Windows®

9