Power/Feed key

The power/feed key () can be used both for turning on and off the PT-2420PC and for feeding out tape.

•To turn the PT-2420PC on or off:

￿Press once.

•To feed out some tape:

￿Hold down for at least two seconds.

Connecting the USB interface cable

Connect the PT-2420PC to the computer as described below.

￿When connecting the PT-2420PC to an IBM PC-compatible computer, label-designing software and the printer driver must be installed before the PT-2420PC is connected to the computer and plugged in using the AC adapter. Follow the installation procedures on pages 6 through 11 to install the software and the printer driver, and then connect the PT-2420PC to the computer when you are instructed to do so.

1Insert the flat connector on the enclosed USB

interface cable into the USB port on the computer.

2 Insert the square connector on the enclosed

 

USB interface cable into the USB port

 

(

) on the PT-2420PC.

 

￿ When making a USB connection through

USB port USB interface cable

a hub, a proper connection may not be possible due to the type of hub used. If printing is not possible with a hub connection, try connecting the PT- 2420PC directly to the computer using the USB interface cable.

Software and printer driver

Brother Co., Ltd. and its suppliers possess all rights and copyrights to this software (including, but not limited to, the programming, images, clip art, templates, and text incorporated into the soft- ware), the text in the enclosed manuals, and duplicates of the software. This software, either in part or in whole, may not be duplicated, modified, reverse-engineered, disassembled or decompiled without permission.

With the enclosed CD-ROM, the following can be installed:

•P-touch Quick Editor•P-touch Editor Ver. 3.1•PT-2420PC printer driver

5