Packing and shipping the machine

If for any reason you must move or ship your machine, carefully re-pack the machine in the original packing material to avoid any damage during transport. If you do not pack the machine properly, you could void your warranty. The machine should be adequately insured with the carrier.

If the machine must be shipped, please read the instructions in this section which explains how to properly prepare your machine for transport.

WARNING

Once your machine has been set up and used, we do not recommend that it be moved or shipped unless absolutely necessary.

Color laser printers are complex printing devices. Moving the machine or shipping it without properly removing the installed supplies can result in SEVERE damage to the machine. As a result, your machine may not operate properly afterwards.

Failure to properly prepare the machine for shipping according to the instructions in this section may

VOID YOUR WARRANTY.

To prevent injuries when moving or lifting this machine, make sure at least two people lift the machine together. Be careful not to pinch your fingers when you put the machine down.

Troubleshooting and routine maintenance

Make sure that you have the following parts for repacking:

C

1Insertion sheet for repacking

2Plastic bag for the waste toner box

3Orange protective cover and plastic bag that the toner cartridge originally came in (4 pieces of each)

4Orange packing material for locking the drum unit and the belt unit (4 pieces)

5A piece of paper (Letter or A4) to protect the belt unit (supplied by the user)

6Joints for attaching cartons (4 pieces)

123