e Wipe the inside of the paper tray with a dry, lint-free cloth to remove dust.

f Re-load the paper and put the paper tray firmly back in the machine.

g Plug the machine’s power cord back into the AC power outlet first, and reconnect all cables. Turn on the machine’s power switch.

Cleaning the scanner

a Turn off the machine’s power switch. Disconnect all cables, and unplug the power cord from the AC power outlet.

b Lift the document cover (1).

Clean the white plastic surface (2) and scanner glass (3) underneath it with a soft lint-free cloth moistened with a non-flammable, ammonia-free glass cleaner.

1

2

3

82

c In the ADF unit, clean the white bar (1) and the scanner glass strip (2) underneath it with a soft lint-free cloth moistened with a non-flammable, ammonia-free glass cleaner.

1

2

d Plug the machine’s power cord back into the AC power outlet first, and reconnect all cables. Turn on the machine’s power switch.

Note

In addition to cleaning the scanner glass and glass strip with a non-flammable, ammonia-free glass cleaner, run your finger tip over the glass to see if you can feel anything on it. If you feel dirt or debris, clean the glass again concentrating on that area. You may need to repeat the cleaning process three or four times. To test, make a copy after each cleaning.