Turn off the machine’s power switch.

Memory board

This machine has 64 MB of standard memory and one slot for optional memory expansion. You can expand the memory up to 576 MB by installing dual in-line memory modules (SO-DIMMs). When you add the optional memory, it increases the performance for both copy and print operations.

In general, the machine uses industry- standard SO-DIMM with the following specifications:

Type: 144 pin and 64 bit output

CAS latency: 2

Clock frequency: 100 MHz or more

Capacity: 64 MB, 128 MB, 256 MB or 512 MB

Height: 1.25 in. (31.75 mm)

Dram Type: SDRAM 2 Bank

You can install the following SO-DIMM: SDRAM SO-DIMM 144 pin

Capacity: 64 MB, 128 MB, 256 MB or 512 MB

The following web sites sell memory modules: http://www.crucial.com/ http://www.kingston.com/ http://www.goldenram.com/ http://www.buffalo-technology.com/

Note

•There might be some SO-DIMMs that will not work with the machine.

•For more information, call Brother Customer Service.

Option

Installing extra memory

a

b Disconnect the interface cable from the machine, and then unplug the power cord from the AC power outlet.

c Remove the DIMM covers (1 and 2).

2

1

B

d Unpack the DIMM and hold it by its edges.

CAUTION

To prevent damage to the machine from static electricity, DO NOT touch the memory chips or the board surface.

47