Load your document.

Chapter 4

Tray selection

You can change the tray use only for the next copy.

a

b Use the numeric keys to enter the number of copies (up to 99).

c Press Options.

Press a or b to choose Tray Select.

Press OK.

d Press a or b to choose MP>T1, T1>MP, #1(XXX) 1 and MP(XXX) 1.

Press OK.

e Press Black Start or Color Start.

Choose

MP>T1

Tray Select

 

T1>MP

 

 

#1(XXX) 1

 

MP(XXX) 1

1XXX is the paper size you set in Menu, 1, 2.

Note

To change the default setting for Tray Select, see Tray use in copy

mode on page 22.

32

Out of memory message

If the memory becomes full while you are making copies, the LCD message will guide you through the next step.

If you get an Out of Memory message while scanning a subsequent page, you will have the option to press Black Start or Color Start to copy the pages scanned so far, or to press Stop/Exit to cancel the operation.

If you run out of memory, you can add it. See Memory board on page 47.