Brother FAX-3800, FAX-2900 owner manual Setting the Station ID, Station ID FAX, Tel, Name

Setting the Station ID

You can store your name, fax number, and telephone number to be printed on all fax pages that you send. (See Composing Electronic Cover Page, page 6-6.)

1Press Menu/Set, 1, 3.

2Enter your fax number (up to 20 digits), and then press Menu/Set.

You must enter a fax number to proceed.

3.STATION ID

FAX:

3 Enter your telephone number (up to 20	TEL:
digits) and press Menu/Set. If your
telephone number and fax number are the
same, enter the same number again.

The telephone number you enter is used only for Cover Page features. (See Composing Electronic Cover Page, page 6-6.)

4 Use the dial pad to enter your name (up to	NAME:
20 characters), and then press
Menu/Set.
(See Entering Text, below.)

5Press Stop/Exit.

The LCD returns to the date and time.

If your Station ID has already been programmed, the LCD prompts “1” to make a change, or “2” to exit without changing.

Entering Text

When you are setting certain menu selections, such as the Station ID, you may need to type text into the FAX/MFC. Most dial pad keys have three or four letters printed above them. The keys for 0, #, and don’t have printed letters because they are used for special characters.

By pressing the appropriate dial pad key repeatedly, you can access the character you want.

Press Key	one time	two times	three times	four times
2	A	B	C	2
3	D	E	F	3
4	G	H	I	4
5	J	K	L	5
6	M	N	O	6
7	P	Q	R	S
8	T	U	V	8
9	W	X	Y	Z

I N I T I A L S E T U P 4 - 2