3 Take the used ribbon out of the cartridge:
1Snap out the upper white spool and slide the roll off the blue gear. (Do not remove the blue gear)
2Lift out the lower roll.
Blue
Gear
Used Ribbon
Upper White Spool
White Gear
Cartridge
Lower White Spool
4 Slide the white elastic off the new refill rolls and set them down with the full roll in the lower position. (The ribbon’s shiny side is facing down.)
5 Remove the white gear and spools from the ends of the used cardboard cores. Then insert them into the same positions in the new cores.
White Gear
White Spool
12 - 13 TROUBLESHOOTING AND ROUTINE MAINTENANCE