Fax resolution

When you have an original in the ADF you can use the Resolution key to change the setting temporarily (for this fax only). Press Resolution repeatedly until the LCD shows the setting you want.

—OR—

You can change the default setting.

1

Press Menu/Set, 3, 4.

4.RESOLUTION

2

Press

or

to select the

 

 

resolution you want.

 

3

Press Menu/Set.

 

Press Stop/Exit.

 

STANDARD

 

Suitable for most typed documents.

 

FINE

 

 

 

 

Good for small print and transmits a little

 

 

 

 

 

 

 

 

 

slower than Standard resolution.

S. FINE

 

 

Good for small print or artwork and transmits

 

 

 

 

 

 

 

slower than Fine resolution.

PHOTO

 

 

Use when the original has varying shades of

 

 

 

 

 

 

 

gray. This has the slowest transmission

 

 

 

 

 

time.

Manual and automatic fax redial

If you are sending a fax manually and the line is busy, press Redial/Pause, and then press Fax Start to try again. If you want to make a second call to the last number dialed, you can save time by pressing Redial/Pause and Fax Start.

Redial/Pause only works if you dialed from the control panel.

If you are sending a fax automatically and the line is busy, the fax machine will automatically redial one time after five minutes.

6 - 7 SETUP SEND