Making a single copy
1
2
Insert the original face down in the ADF.
Press Copy/Reports twice.
To cancel, press Stop/Exit.
Do NOT pull on the paper while copying is in progress.
The default resolution for a single copy is S.FINE. Set the resolution to PHOTO for photographs by using the Resolution key.
Copy options: Single or Multiple copies, Sort/Stack, Reduce/Enlarge
You can choose additional copy options. First, you can select the number of copies. Next, you can choose whether multiple copies will be STACKED (all copies of page 1, then all copies of page 2, etc.) or SORTED (collated). Finally, you can choose an enlargement or reduction ratio. To automatically reduce the copy to the paper size you have set for the paper tray, select AUTO. To reduce the copy by a fixed percentage, choose 93%, 87%, 75% or 50%. Or, to enlarge the copy, select 150%, 125% or 120%. To copy a document at its original size, select 100%.
1
2
3 Enter the number of copies you want
NO.OF COPIES:01
THEN COPY OR SET
To start copying now, press Copy/Reports.
If you would like to select additional copy options, like
SORT, ELG/RDC (Enlarge or Reduce) press Menu/Set.
4 Press or to select SORT or STACK.
To start copying now without enlarging or reducing, press
Copy/Reports.
To reduce or enlarge the image, | ELG/RDC:100%? |
press Menu/Set.
SELECT ↑ ↓ & SET
MAKING COPIES 10 - 2