Memory Transmission

This feature allows the fax machine to scan a fax into its memory and send it as soon as the scan is complete. This way, you don’t have to wait for the entire fax to be transmitted before you retrieve your document.

1

Insert the original face down in the ADF.

 

2

Press Menu/Set, 3, 9.

9.MEMORY TX

3

To change the default setting, press

MEMORY TX:ON

 

or

to select ON (or OFF).

 

 

Press Menu/Set.

SELECT ↑ ↓

& SET

 

 

Go to Step 5.

—OR—

For the next fax transmission only, press or to select

NEXT FAX ONLY.

Press Menu/Set.

4 For the next fax only, press or to select ON (or OFF).

Press Menu/Set.

5 Press 1 to select additional settings. The display returns to the SETUP SEND menu.

—OR—

Press 2 if you are finished choosing settings and go to Step 6.

6 Enter fax number and press Fax Start.

If you get a OUT OF MEMORY message while scanning the first page of a fax, press Stop/Exit to cancel the scan. If you get a OUT OF MEMORY message while scanning in a subsequent page, you’ll have the option to press Fax Start to transmit the pages scanned so far, or to press Stop/Exit to cancel the operation. In this case, send the fax by the Manual Transmission.

Depending on your typical faxes, OUT OF MEMORY errors can occur frequently. If this happens, change the Memory Transmission setting back to OFF.

SETUP SEND 6 - 18