Do not connect a TAD elsewhere on the same phone line (unless you have the Distinctive Ring service).
TAD
TAD
Connections
The external TAD must be plugged into the back side of the fax machine, into the jack labeled EXT. The fax machine cannot work properly if you plug the TAD into a wall jack (unless you are using Distinctive Ring).
1 Plug the telephone line cord from the wall jack into the back side of the fax machine, in the jack labeled LINE.
2 Plug the telephone line cord from your external TAD into the back side of the fax machine, in the jack labeled EXT. (Make sure this cord is connected to the TAD at the TAD’s telephone line jack, and not its telephone set jack.)
3 Set your external TAD to four rings or less. (The fax machine’s Ring Delay setting does not apply.)
4
5
6 Set the Receive Mode to TAD:ANSWER MACH. (See Choosing the Receive Mode on page
1 - 12 INTRODUCTION