Choosing the Handset Volume

(For Volume Amplify)

Before you begin to use your machine, you must decide if you need to set the handset volume to VOL AMPLIFY: ON? for a user who is hearing-impaired. The AMPLIFY volume level complies with FCC standards.

VOLUME AMPLIFY: OFF

This default setting is appropriate if none of the users are

hearing-impaired. During a conversation, users can press or on the control panel to adjust the volume to LOW or HIGH.

When the handset is replaced, the handset volume will remain until you change it again.

VOLUME AMPLIFY: ON–TEMPORARY

This setting is appropriate if some of the users are hearing-impaired.

During a conversation, users can press or on the control panel to adjust the volume to LOW, HIGH or AMPLIFY. When the handset is replaced, the handset volume returns to the default setting of LOW.

VOLUME AMPLIFY:ON–PERMANENT

Choose VOL AMPLIFY: ON?–PERMANENT?if all of the users are

hearing-impaired. During a conversation, users can press or on the control panel to adjust the volume to LOW, HIGH or

AMPLIFY. When the handset is replaced, the handset volume returns to the default setting of AMPLIFY.

When you press or on the control panel to adjust the volume, the LCD shows the setting you are choosing. Each key press changes the volume to the next setting.

It is important that you do not choose PERMANENT unless all users are hearing-impaired. Otherwise, the default setting of AMPLIFY may damage the hearing of some users.

4 - 6 INITIAL SETUP