Remote commands

Follow the commands below to access features when you are away from the fax machine. When you call the fax machine and enter your Remote Access Code (3 digits followed by ), the system will give two short beeps and you must enter a remote command.

Remote commands

Operation details

 

 

95 Change the Fax Forwarding

 

 

or Paging settings

 

 

 

 

 

 

1

OFF

If you hear one long beep, the change has

 

 

 

been accepted. If you hear three short beeps,

 

2

Fax Forwarding

 

you cannot change it because the conditions

 

 

 

 

3

Paging

 

have not been met (for example, registering a

 

 

 

 

4

Fax Forwarding number

fax forwarding or paging number). You can

 

 

 

register your Fax Forwarding number by

 

 

 

entering 4. Fax Forwarding number (see page

 

 

 

8-7). Once you have registered the number,

 

 

 

the fax machine will change to FAX

 

 

 

FORWARD:ON mode.

 

 

 

 

 

6

Fax Storage ON

You can turn FAX STORAGE to ON (or OFF

 

 

 

after you have retrieved or erased all your

 

 

 

messages).

 

 

 

 

 

7

Fax Storage OFF

 

 

 

 

96

Retrieve a fax

 

 

 

 

 

 

2

Retrieve all faxes

Enter the number of a remote fax machine to

 

 

 

receive stored fax messages. (See page 8-7.)

 

 

 

 

 

3

Erase faxes from the

If you hear one long beep, you can erase fax

 

memory

messages from the memory.

 

 

 

97 Check the Receiving Status

 

 

 

 

 

 

1

Fax

You can check whether the fax machine has

 

 

 

received any faxes. If it has, you will hear one

 

 

 

long beep. If it hasn’t, you will hear three short

 

 

 

beeps.

 

 

 

98 Change the Receive Mode

 

 

 

 

 

 

1

TAD:ANSWER MACH.

If you hear one long beep, you can change

 

 

 

the Receive Mode.

 

2

FAX/TEL

 

 

 

 

 

 

3 FAX ONLY

 

 

 

 

90

Exit

After a long beep, you can exit Remote

 

 

 

Retrieval.

 

 

 

 

REMOTE FAX OPTIONS 8 - 6