English: HS3 User’s Guide, Chapter 2
USER’S GUIDE
ABOUT BROTHER SPECIAL PAPERS
About Brother Special Transparencies
Be sure to use Brother special transparencies to avoid jamming problems. The following transparencies are manufactured especially for this printer.
Brother special transparencies (letter size) | No. HSTRL |
Brother special transparencies (A4 size) | No. HSTRA |
Select the ‘Envelope and Transparency’ position of the head gap lever.
Do not touch the surface of the transparencies. Hold the edge of the transparencies when you handle them.
Be sure to select the paper type in the printer driver to ‘Transparency’ when you print on transparencies.
After finishing printing a page, remove each transparency immediately and place it face up on a flat surface until it is completely dry. Do not put anything on the printed side of the transparency.
When storing the transparencies, keep them sealed in the original plastic bag to protect them from moisture.
Store the transparencies flat.
Keep the transparencies away from the direct rays of the sun.
✒Note
Do not use commercially available transparencies, especially those intended for
In the printer driver, set the Media selection to Transparency. The printer alters the printing method for each media type so that an incorrect media selection may cause poor print quality. Refer to Chapter 3.