English: HS3 User’s Guide, Chapter 2

USER’S GUIDE

Loading Paper into the Feeder

To load paper into the feeder, follow these steps.

1.Pull the cover of the sheet feeder forward.

2.Load paper into the sheet feeder with the printing surface face up.

☛Caution

￿The feeder can hold up to 200 sheets of 80 g/m2 (20 lb.) plain paper. If you load too many sheets, paper jams could occur.

￿Make sure that the paper is stacked below the ▼ mark.

￿If there is still some paper left in the feeder, you must first remove it, put it together with the new paper and then insert the stack into the feeder.

✒Note

￿When you load envelopes in the feeder, make sure they are inserted in the direction shown below. The Stamp corner at the lower right hand corner of the envelope should face the front of the printer.

￿The first feeder can hold up to 10 sheets of envelopes and you can load an envelope sheet by sheet into a manual feed slot.

￿Set the head gap lever to the ‘Envelope and Transparency’ position.

Fig. 2-4 Loading Envelopes in the Feeder

2–6