English: HS3 User’s Guide, Chapter 7

CHAPTER 7 TROUBLESHOOTING

Chapter 7 TROUBLESHOOTING

ALARM INDICATIONS AT A GLANCE

Operator Calls

If a recoverable error occurs, the printer indicates an ‘operator call’ by blinking the Alarm LED and any of the following LEDs. Clear the error as described below and press the FF/Cont button to resume printing.

Blinking LED

Error

Action

Alarm❍↔●

Cover Open

Close the top cover of the printer.

Paper ❍↔●

Paper jam

Clear the paper jam referring to the next section

Alarm❍↔●

 

“ PAPER JAMS” and press the FF/Cont button if the

 

printer does not automatically resume printing.

 

 

 

 

 

 

Paper empty

Load paper in the printer referring to Chapter 2 and

 

 

press the FF/Cont button.

 

Misfeed

Reinstall the paper and press the FF/Cont button.

Ink ❍↔●

Ink Empty

Ink is empty. Add ink blocks into the printer and

Alarm❍↔●

 

press the FF/Cont button.

 

 

Filter ❍↔●

No Maintenance

Alarm❍↔●

cassette or

Maintenance

 

 

paper empty

Maintenance paper is empty or Maintenance cassette is not installed correctly. Replace the maintenance cassette or re-install the cassette.

If the following errors occur, the printer indicates the error by blinking the Alarm LED and printing the error message.

Error

Action

Memory Full

￿ Press the FF/Cont button to print the data remaining in the printer.

 

￿

Reduce the resolution or reduce the complexity of your document.

 

￿

Expand the printer memory by fitting a SIMM module.

 

 

SIMM error

Check that the optional SIMM is correctly installed.

✒Note

If the printer does not operate as you expect it to, it is recommended to reset the printer or turn the printer off and then on again. If you still have problems, consult your dealer or our authorized service representative.

7–1