English: HS3 User’s Guide, Chapter 2

CHAPTER 3 PRINTER DRIVER

Paper Source

If your paper has difficulty feeding from the sheet feeder we recommend using the Manual paper feed method. When using this method, you have to load paper sheet by sheet.

When Dual is selected (HS-5300 only), the printer feeds paper from Feeder 1 first and when paper in Feeder 1 runs out the paper source is automatically switched to Feeder 2.

The paper source will be switched back to Feeder 1 again when the printer is turned off and on again or the paper runs out in Feeder 2.

Copy/Page Order

Collate In multiple page jobs that are collated, for example, printing 2 copies of a 3 page document, the printer prints Page 1, Page 2, Page 3, then Page 1, Page 2, Page 3 in order.

In multiple page jobs that are uncollated, for example, for 2 copies of a 3 page document, the printer prints Page1, Page1, Page 2, Page 2, Page 3, Page 3 in order. When Collate is selected, the printer starts printing after processing all the print data so that it takes a longer time for collated printing than uncollated copies.

Reverse Order When you want to get printouts in the correct order, use this function. The printer spools all the job in your computer and sends the data starting from the the last page to be printed. Since the printer prints from the last page forwards, the printouts are stacked in the correct orderPage 1, 2, 3, ...Page 5. Please note that this function takes more time.

Scaling

You can select the scalings as follows:

￿1 in 1/Free

You can reduce your document by 25%, 50%, and 75%.

Also, you can define the scaling from 25 to 100 % after selecting “Free.”

￿2 in 1 or 4 in 1

2 or 4 pages are printed on one sheet at a reduced size. You cannot specify the scaling percentage manually.

￿1 in n

You can enlarge your document by the provided scalings.

✒Note

￿If your application software contains a similar function to these, both settings will be effective.

3–3