English: HS3 User’s Guide, Chapter 2

CHAPTER 2 PAPER HANDLING

OUTPUT TRAY

The printer ejects paper with the printed surface face up into the output tray at the front of the printer.

Follow these steps to set the output tray:

1.Pull the tray out from the bottom of the printer.

2.Set the Output Tray wire referring to below figures.

Fig. 2-7 Set the Output Tray

You can stack up to 100 sheets of 80 g/m2 (20 lb.) paper in the output tray.

❏When you have loaded the paper you want to print on, pull out the Output Tray and adjust the tray position for the loaded paper as follows otherwise paper jams might occur:

LGL: Legal Paper

A4: A4 size Paper

LTR: Letter Paper

LGL

A4

LTR

Figure 2-8 Adjust the Out put Tray position

2–9