English: CS3 User’s Guide, Chapter 4

USER’S GUIDE

Reset and Hex Dump print mode

The printer has the following Reset and Hex Dump print modes.

1.Keep the FF/Cont button depressed until all four LEDs light. Then, release the button.

The printer enters the reset/hex dump mode. The Alarm LED blinks to indicate that the first choice, User Reset, is selected. See the table below.

2.Press the Online button to select another choice.

Every time you press the button, the blinking LED changes to indicate another choice. See the table below.

3.Press the FF/Cont button to perform the selected choice.

LED

Choice

Function

Alarm

User Reset

The printer is restored to the user default

 

 

settings without clearing permanent fonts and

 

 

macros.

Manual

Factory Reset

The printer is restored to the factory settings

 

 

and permanent fonts and macros are cleared.

Data

Hex Dump

The printer can print data as hexadecimal

 

print

values, so that you can check data errors and

 

 

problems. To exit from this mode, press the

 

 

Reset button or turn the printer off.

4. The printer returns to the ready status after printing

4–6