English: HS3 User’s Guide, Chapter 5

USER’S GUIDE

MEMORY EXPANSION

Both of the the HS-5000 and HS-5300 have 24Mbytes, 8Mbytes on the board and 16Mbytes in the one of the memroy expansion slots. There are 2 slots for optional memory and the memory can be expanded up to a total of 72 Mbytes. You need to install commercially available single in-line memory modules (SIMMs) in those slots to expand the memory.

In general, the SIMM you install must have the following specifications:

Type:

72 pin and 32 bit or 36 bit output

Access Time: 80 nsec. or less

Capacity:

1, 2, 4 ,8, 16, or 32 Mbyte

Height:

38 mm (1.5 inches) or less

The following capacity of a SIMM for installing is recommended;:

•1 Mbyte HITACHI HB56D25632B-6A, -7A, MITSUBISHI MH25632BJ-7

•2 Mbyte HITACHI HB56D51232B-6A, -7A MITSUBISHI MH51232BJ-7

•4 Mbyte HITACHI HB56A132BV-7A, -7AL, -7B, -7BL MITSUBISHI MH1M32ADJ-7

•8 Mbyte HITACHI HB56A232BT-7A, -7AL, -7B, -7BL MITSUBISHI MH2M32EJ-7, MH2M32DJ-7

•16 Mbyte TOSHIBA THM324000BSG-60,-70,-80

•32 Mbyte TOSHIBA THM328020BSG-60,-70,-80

There are available 40 bit output SIMMs for workstations. Such SIMMs do not fit this printer.

For supply of SIMMs, consult the dealer where you purchased the printer.

5–2