English: HS3 User’s Guide, Chapter 6

CHAPTER 6 MAINTENANCE

RE-PACKING THE PRINTER

!Caution

Whenever you transport the printer, use the packing materials which are provided with your printer. Also, follow the steps below to re-pack the printer, or the printer may be damaged.

Before Re-Packing the printer

Before your starting to re-pack the printer, you need to support the print head and head gap lever with the Styrofoam block as shown below.

Figure 6-22 Insert the Styrofoam blocks

✒Note

￿You need to move the print head to the left by hand until it stops.

￿Do not insert the Styrofoam in the wrong direction as shown below.

GOOD
BAD

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

6–13