English: CS3 User’s Guide, Chapter 4
USER’S GUIDE
Shift + Test Button
Set the printer to
Pressing the Test button while holding down the Shift button starts the test print. Check the printed test page and if you find any printing problems, perform the print head cleaning as described below.
Release the two buttons immediately after pressing the Test button and the DATA LED will start to blink. If it does not, the buttons were held down for too long and you will need to start the test selection again.
✒Note
Press the buttons gently. Do not press with too much force or hold the buttons down for a long time. If you do the operation might now start.
Shift + Clean Button
Set the printer to
Pressing the Clean button while holding down the Shift button starts head cleaning. If you see any problems on printouts, clean the print head and try again.
Release the two buttons immediately after pressing the Test button and the DATA LED will start to blink. If it does not, the buttons were held down for too long and you will need to start the test selection again.
✒Note
Do not open the top cover during the head cleaning operation.
Press the buttons gently. Do not press with too much force or hold the buttons down for a long time. If you do the operation might now start.