English: CS3 User’s Guide, Chapter 4
CHAPTER 4 CONTROL PANEL
Test Print Mode
The printer has the following test print modes.
1.Keep the Online button depressed until all four LEDs light. Then, release the button.
The printer enters test print mode. The Alarm LED blinks to indicate that the first choice, Print Config, is selected. See the table below.
2.Press the Online button to select another test.
Every time you press the button, the blinking LED changes to select another choice. See the table below.
3.Press the FF/Cont button to perform the selected choice.
LED | Choice | Function |
Alarm | Print Config | The printer prints the current printer settings. |
Manual | Print Fonts I | The printer prints a list of the printer resident |
|
| fonts. |
Data | Print Fonts P | The printer prints a list of the permanent |
|
| download fonts. |
Ready | Test Print | The printer prints a test page. |
4. The printer returns to the ready status after printing.
✒Note
Press the buttons gently. Do not press with too much force or hold the buttons down for a long time. If you do the operation might now start.