Chapter 1
Beeper Volume
When the beeper is on, the machine will beep when you press a key, make a mistake, or after you send or receive a fax.
You can choose from a range of beeper volume levels, from High to Off.
a
b Press a or b to choose General Setup. Press OK.
c Press a or b to choose Volume. Press OK.
d Press a or b to choose Beeper. Press OK.
e Press a or b to choose Low, Med, High or Off.
Press OK.
f Press Stop/Exit.
Speaker Volume
You can choose a range of speaker volume levels, from High to Off.
a
b Press a or b to choose General Setup. Press OK.
c Press a or b to choose Volume. Press OK.
d Press a or b to choose Speaker. Press OK.
e Press a or b to choose Low, Med, High or Off.
Press OK.
f Press Stop/Exit.
10
LCD display
Setting the backlight brightness
If you are having difficulty reading the LCD, try changing the brightness setting.
a
b Press a or b to choose General Setup. Press OK.
c Press a or b to choose LCD Settings. Press OK.
d Press a or b to choose Backlight. Press OK.
e Press a or b to choose Light, Med or Dark.
Press OK.
f Press Stop/Exit.
LCD Language
You can change the LCD Language.
a
b Press a or b to choose Initial Setup. Press OK.
c Press a or b to choose Local Language. Press OK.
d Press a or b to choose English or Chinese. Press OK.
e Press Stop/Exit.