Push the paper tray firmly back into the machine.

IMPORTANT

If the paper is jammed under the print head, unplug the machine from the power source, and then move the print head to take out the paper.

If the print head is in the right corner as shown in the illustration, you cannot move it. Re-connect the power cord. Hold down Stop/Exit until the print head moves to the centre. Then unplug the machine from the power source and take out the paper.

If ink gets onto your skin, immediately wash with soap and plenty of water.

j Using both hands, grasp the plastic tabs on both sides of the machine and gently close the scanner cover.

Troubleshooting

k Push the two green levers back to their original positions.

l

m While holding the paper tray in place, pull out the paper support (1) until it clicks, and unfold the paper support flap (2).

2

B

1

Make sure you pull out the paper support until it clicks.

n Re-connect the power cord.

67