Packing and shipping the machine
When you transport the machine, use the packing materials that came with your machine. Follow the instructions below to correctly package your machine. Damage caused to your machine during transit may not be covered by your warranty.
IMPORTANT
It is important to allow the machine to “park” the print head after a print job. Listen carefully to the machine before unplugging it to make sure that all mechanical noise has stopped. Not allowing the machine to finish this process may lead to print problems and possible damage to the print head.
a Open the ink cartridge cover.
b Remove all four ink cartridges. Press the ink release lever above each cartridge to release it. (See Replacing the ink cartridges uu page 50)
c Install the orange protective part and then close the ink cartridge cover.
IMPORTANT
•Make sure the plastic tab on the right side of the orange protective part (1) clicks securely into place (2).
1 2
•If you are not able to find the orange protective part, ship the machine without it. DO NOT install the ink cartridges as an alternative before shipping.
d Lift the machine from the front and hook the tab of the orange protective part into the keyed opening (1) on the bottom of the paper tray. Then latch the protective part over the raised portion of the paper tray (2).
2 1
56