Chapter 9
PhotoCaptureCenter™ print settings
You can change the print settings for the next printing.
These settings are temporary, and the machine returns to its default settings
3 minutes after printing, unless you have set the Mode Timer to 2 minutes or less. (uuAdvanced User’s Guide: Mode Timer)
Note
You can save the print settings you use most often by setting them as the default. (uuAdvanced User’s Guide: Setting your changes as the new default)
How to scan to a memory card or USB Flash memory drive
You can scan black & white and color documents into a memory card or USB Flash memory drive. Black & white documents will be stored in PDF (*.PDF) or TIFF (*.TIF) file formats. Color documents may be stored in PDF (*.PDF) or JPEG (*.JPG) file formats. The factory setting is Color 200 dpi and the default file format is PDF. The machine automatically creates file names based on the current date. (uuQuick Setup Guide) For example, the fifth image scanned on July 1, 2011 would be named 07011105.PDF. You can change the color and quality.
Quality |
|
| Selectable File |
|
|
| Format |
Color 100 | dpi | JPEG / PDF | |
Color 200 | dpi | JPEG / PDF | |
Color 300 | dpi | JPEG / PDF | |
Color 600 | dpi | JPEG / PDF | |
B/W 100 | dpi | TIFF / PDF | |
B/W 200 | dpi | TIFF / PDF | |
B/W 300 | dpi | TIFF / PDF |
a Make sure you have put the memory card or USB Flash memory drive in the proper slot.
IMPORTANT
DO NOT take out the memory card or USB Flash memory drive while the status LED is blinking to avoid damaging the card, USB Flash memory drive, or the data stored on them.
b Load your document.
c Press (SCAN).
d Press d or c to display to Media.
54