BT 106 manual Playing music to callers on hold, Announce System reset

Ultimate 106 – Edition 2 – Issue 3 - 24.12.02 – 5129

To reset the system

Switch to program mode.

91#1✱

0✱6✱ Enter this code.

#To confirm. The Ultimate 106 will

announce: “System reset”.

Set switch back to normal mode.

Hang up handset and wait 30 seconds until IN USE light goes out.

Do NOT switch off power until IN USE light goes out.

This resets the system completely and clears all settings.

To reset all except speed dial names and numbers, OGMs and voicemail messages

In program mode.

92#1✱

0✱6✱ Enter this code.

#To confirm.

Playing music to callers on hold

You can play music to callers who are put on hold while waiting to be connected to one of the extensions.

Your Ultimate 106 lets you choose between playing a pre-set tune or connecting a CD or cassette player to play the music of your

choice. By recording a looped tape you can also play a message for your callers which will continually repeat.

To play the pre-set music on hold tune (default setting)

In program mode.

81# Enter this code. Callers put on hold will automatically hear the pre-set tune.

To disable the pre-set tune

In program mode.

82# Enter this code.

Remove any jackplug from the music on hold socket.

To play your own choice of music or message

In program mode.

Plug your CD or cassette tape player jackplug into the music on-hold socket. Set your CD or cassette player to PLAY.

82# Enter this code. Callers put on hold will be played the music or message.

You can stop external music on-hold by removing the jackplug from the music on-hold socket.

IMPORTANT

After you have programmed your system settings you must set the program switch to NORMAL.

17