BT 106 the Ultimate 106

Only 2 wires are connected to terminals 2 and 5.

Leave the 2 wires that are not used coiled up

neatly in the back of the socket for future use.

Pull the plastic wire grip tight, trapping the wire.

Finally, fit the front plate onto the backbox with

the screws provided.

7

Ultimate 106 – Edition 2 – Issue 3 - 24.12.02 – 5129

Remove the lower cover from the Ultimate 106.

There are 6 sets of twin screw connectors.

The telephone extension cable contains 4 strands

of wire, 2 with broad orange or blue stripes, 2 with

narrow orange or blue stripes.

Strip the insulation cable off at the end in order

to expose 5mm of copper wire for the blue or

orange strands.

Power

Day/Night Mode

In Use

Messages

Call Director/Answer Machine

Ultimate 106

EXT 11EXT 12EXT 13 EXT 14EXT 15EXT 16

Ext 11 Ext 12 Ext 13 Ext 14 Ext 15 Ext 16

Telephone

Line External Music On Hold Input Normal Program

Doorlock/

Intercom

12v/ 12v/

Com N.O. N.C.

●

2Connect the extension sockets to

the Ultimate 106

Plastic wire grip

IMPORTANT

If you have connected the 2 blue strands to the

socket, you must also connect the blue strands to

the twin screw connectors in the Ultimate 106.

Equally, if you have connected the 2 orange

strands to the extension socket, you must connect

the 2 orange strands to the twin screw connector.

IMPORTANT

Please note, cable supplied may not match

exactly the colours specified.

Please ensure that the 2 wires used at the

extension socket are the same 2 wires used at

the Ultimate 106 connectors.

Contents

Main For your records Personal Emergency Numbers Contents Unpacking your Ultimate 106 Introduction Your Ultimate 106 has been designed for ease of use and made to the high standards set by BT. CUSTOMER HELPLINE Wall mounting the Ultimate 106 Extension numbers Installation To connect up to 6 master extension sockets extension sockets the Ultimate 106 Your Ultimate 106 is now installed Setting up your Ultimate 106 system System settings To make any system settings Time and date settings To set the day To set the time The time is 3.15pm Monday February 27th Extension ring delay ring delay is 3 rings Day and night modes To set the ring delay To select which extensions ring during the night To select which extensions ring during the day To stop extensions from ringing during the day Night mode start 6pm. To set when day-time ringing starts Day mode start 8:30 a.m. To stop extensions ringing during the night To set when night-time ringing starts To stop day-time ringing from automatically switching on Call barring level 3 Creating a hotline number To set call barring Connecting a payphone To set a payphone as an extension To cancel the hotline number To cancel a payphone extension Extension 12 isset for payphone Connecting a fax machine 12 is set to normal Call Sign on, delay on Extension12 is set for fax Call Sign on, delay off Playing music to callers on hold To reset the system Setting up the Answering Machine and Call Director Answering Machine To select answering machine mode Call Director please record a message after the tone. message after the tone To replay your outgoing message Press square to confirm message after the tone To record an outgoing message (OGM) To turn answering machine on, from any extension Answering delay is two rings Answering delay is six rings To set up Call Director To delete your outgoing message and use the system default OGM Page Playing back your messages To set recording quality for playing back your messages Push square to confirm. Your messages To record an extension mailbox OGM Accessing the Answering Machine or Call Director from another telephone To program your PIN hold the line, you have 30 minutes of record time remaining announcement To hear how much recording time is remaining Using your phone extensions To answer a call To make an external call Making and receiving calls To redial a number is set To put a call on hold To forward calls to another extension To hold a 3-way call To transfer a call between extensions is off Alarm cleared To cancel call forwarding To set Do not disturb To cancel Do not disturb Alarm on. 8:30am Using Ringback Ringback Extension X or Ringback external line Using your Ultimate 106 as a Room Monitor To set the Room Monitor To set automatic internal Ringback Using the speed dial memory Enter 2 digit location and number To cancel a BT network Ringback To use the BT Ringback service To store a name and number To dial a speed dial number To store the last dialled call as a speed dial number Using Caller Identification number Using BT Select Services To set the Caller Identification options at each extension To review calling numbers To screen incoming calls using Caller Identification BTs Call Waiting service To use BTs Call Waiting service To switch between 2 callers Maintenance Service Wall mounting To wall mount the Ultimate 106 base unit Help Technical information Ultimate 106 default settings Normal mode Global programming mode Index A C D E I L 3 M N O Offices worldwide