Technical information, Dtmf | BT 106 specification

Ultimate 106 – Edition 2 – Issue 3 - 24.12.02 – 5129

Technical information

RTTE	Hereby Promotion & Display Technology Ltd. declares that this
	Ultimate 106 is in compliance with the essential requirements and other
	relevant provisions of Directive 1999/5/EC.
	The Declaration of Conformance for the Ultimate 106 is published on the
	Website: http.//www.pdtuk.com/archive/certificates/ultimate/default.htm

Installation information	The Ultimate 106 connects to one exchange line and six (2 wire)
	telephone extensions.

Signalling	DTMF.
	Pulse dialling (typical 10 pps).
	RECALL to external line – duration: 100ms.
	type: timed break.
	RECALL detection from extension – duration: 85ms to 200ms,
	type: timed break.

REN	REN of the Ultimate 106 is 4.
	Maximum REN per extension is 2.

Environmental conditions	Temperature range: (storage) –10C to 60C, (operating) 0C to 55C.
	Humidity range: (storage) 65%, (operating) 60% maximum.

Ring cadences	Internal: 1s ON, 2s OFF.
	External: 0.4s ON, 0.2s OFF, 0.4s ON, 2s OFF.
	Door-phone: 0.5s ON, 2.5s OFF.
	Alarm call: 0.5s ON, 0.3s OFF, 0.2s ON, 2s OFF.
	Internal Ring-back: 0.2s ON, 0.2s OFF, 0.2s ON, 0.2s OFF, 0.2s ON, 2s OFF.
	External Ring-back: 0.5s ON, 0.3s OFF, 0.2s ON, 2s OFF.

Power Supply (internal)	Power supply 220-240V AC 50/60Hz.
	Power consumption 45W.

Weight	Weight 1.5kg.

Dimensions (approx.)	Height: 200mm. Width: 295mm. Depth: 48mm (52mm from wall).

37

Image 37

BT 106 manual Technical information, Dtmf

Contents

Ultimate User Guide Personal Emergency Numbers For your records Contents Unpacking your Ultimate Introduction Wall mounting the Ultimate Extension numbers Installation To connect up to 6 master extension sockets Install the required number Extension sockets Remove the lower cover from the Ultimate Connect the extension sockets to the Ultimate Connect the telephone line cord Connect the power cable To make any system settings System settings Time is 3.15pm Time and date settingsMonday February 27th To set the time Ring delay is 3 rings and day mode Extension ring delay Day and night modesTo set the ring delay To stop extensions from ringing during the day To select which extensions ring during the dayTo select which extensions ring during the night Night mode start 6pm Day mode start 830 a.m Creating a hotline number Call barringExample Extension 12 barring is level Example Extension 12 is set for hotline Extension 12 is set for payphone Connecting a payphoneExtension 12 is set for normal Resetting the system Connecting a fax machineCall Sign on, delay off Call Sign on, delay on Playing music to callers on hold Announce System reset Answering Machine To select answering machine modeCall Director To set-up Answering Machine Answering delay is two rings Announces Answering delay is setAnswering delay is six rings Answering delay is nine rings Announces Call Director is set To set up Call DirectorAnnounces Call Director is on Announces Call Director is off To record a Call Director OGM Record your call director message after the toneTo replay the Call Director OGM Call Director, example OGMs Your messages Playing back your messagesPush square to confirm To program your PIN To hear how much recording time is remaining To operate your Answering Machine from another telephone Making and receiving calls Using your phone extensions To hold a 3-way call To put a call on holdTo transfer a call between extensions To forward calls to another extension Alarm cleared Alarm on amAnnounces Extension divert is off Announces Extension do not disturb is set Using Ringback Using your Ultimate 106 as a Room MonitorRingback Extension X or Ringback To set the Room Monitor Enter 2 digit location and number Using the speed dial memoryIntercom Ring a telephone number To dial a speed dial number To store the last dialled call as a speed dial number Using Caller Identification Using BT Select Services To set the Caller Identification options at each extension To screen incoming calls using Caller IdentificationTo review calling numbers To use BT’s Call Waiting service BT’s Call Waiting serviceTo switch between 2 callers Service Maintenance To wall mount the Ultimate 106 base unit Wall mounting Help Are you in the correct programming mode i.e. program/normal Dtmf Technical information Normal mode Ultimate 106 default settings Global programming mode Index OGM Offices worldwide